English
Taizhou Newkye Electronics Co., Ltd na-akwado “onye ahịa mbụ, kredit-oriented” iji mepụta ngwaahịa kachasị mma na nke kacha mma, na-eje ozi dị iche iche nke ọha mmadụ na usoro azụmahịa nke “were ezi okwukwe dị ka nke a, ka ọ dịrị ndụ;Otu aka , ndị enyi ogologo ndụ ”.afọ ojuju na ntụkwasị obi gị bụ mkpali anyị.

ngwaahịa ndị ọzọ

  • DELTA PLC – Ndị na-ahụ maka mgbagha ihe mmemme DVP-ES2

    DELTA PLC – Ndị na-ahụ maka mgbagha ihe mmemme DVP-ES2

    PLC - Ndị njikwa mgbagha mmemme

    Programmable Logic Controller (PLC) bụ usoro njikwa na-eji ọrụ eletrọnịkị.Usoro nchekwa ya dị mfe, ụkpụrụ ịgbatị aka, ọrụ nke njikwa usoro / ọnọdụ, ngụ oge yana njikwa ntinye / mmepụta na-etinyere n'ọtụtụ ebe n'ọhịa njikwa akpaaka ụlọ ọrụ.

    Ndị na-ahụ maka mgbagha usoro mmemme nke Delta DVP na-enye ngwa dị elu, kwụsiri ike na nke a pụrụ ịdabere na ya nke ukwuu n'ụdị igwe akpaaka ụlọ ọrụ niile.Na mgbakwunye na ọrụ mgbagha ngwa ngwa, ntuziaka bara ụba na ọtụtụ kaadị ọrụ, DVP-PLC dị ọnụ ahịa na-akwado usoro nkwukọrịta dị iche iche, na-ejikọ draịva AC AC Delta, servo, igwe igwe mmadụ na onye na-ahụ maka okpomọkụ site na netwọkụ mmepụta ihe zuru oke. Delta Solution" maka ndị ọrụ niile.

     

    Ndị na-ahụ maka mgbagha nke mmemme – Usoro DVP

    Ndị na-ahụ maka mgbagha usoro mmemme nke Delta DVP na-enye ngwa dị elu, kwụsiri ike na nke a pụrụ ịdabere na ya nke ukwuu n'ụdị igwe akpaaka ụlọ ọrụ niile.Na mgbakwunye na ọrụ mgbagha ngwa ngwa, ntuziaka bara ụba na ọtụtụ kaadị ọrụ, DVP-PLC dị ọnụ ahịa na-akwado usoro nkwukọrịta dị iche iche, na-ejikọ draịva AC AC Delta, servo, igwe igwe mmadụ na onye na-ahụ maka okpomọkụ site na netwọkụ mmepụta ihe zuru oke. Delta Solution" maka ndị ọrụ niile.

    Usoro DVP-ES2

    Usoro ES2 bụ obere PLC maka njikwa usoro nhazi.Ọ bụ akụ na ụba, nke ọma na-arụ ọrụ nke ọma.

    Okwu Mmalite ngwaahịa

    Ngwa

     

    HVAC, igwe injection ịkpụzi, nnukwu nchekwa nchekwa, igwe nkwakọ ngwaahịa, igwe textile ziri ezi, sistemụ mgbagha

    Nkọwapụta
    1. Isi MPU: 16/20/24/32/40/60
    2. Ikike mmemme: 16k nzọụkwụ
    3. Ejiri ọdụ ụgbọ mmiri 3 COM rụọ ya: ọdụ ụgbọ mmiri 1 RS-232 na ọdụ ụgbọ mmiri 2 RS-485, ha niile nwere ike ịrụ ọrụ n'onwe ha (Master/Ohu)
    4. Oke.Isi ihe I/O: 256 ntinye ntinye + 16 ihe mmepụta, ma ọ bụ 256 ntinye ihe + 16 ntinye ntinye
    5. Ejiri DVP-EX2 MPU nwere 12-bit 4AD/2DA ma na-enye modul analog/okpomọkụ nke mkpebi 14-bit.
    6. Ejiri ntinye ntinye ọsọ ọsọ 8 dị elu (isi 2 maka 100kHz, isi 6 maka 10kHz) ma na-akwado U/D, U/D Dir, A/B agụta ụdịdị.
    7. Ntuziaka njikwa ngagharị ọhụrụ: Mechie njikwa akaghị, akara ntinye, ọta, ọsọ na-agbanwe ozugbo, S-Curve acceleration/deceleration
    8. Ngwa na ụlọ ọrụ na-apụta: ntuziaka pụrụ iche na ngọngọ ọrụ emebere maka PV solar tracker
    9. Ntuziaka dị mma maka ntụgharị ntụgharị ugboro ugboro: Maka ịchịkwa ọsọ na-aga n'ihu, tụgharịa na-agba ọsọ, RUN na Kwụsị nke Delta @ @ s AC moto draịva
    10. Nchedo okwuntughe: Paswọdu maka subroutine, NJ onye ọrụ, mmachi n'oge ikpe
    11. Ntuzi aka dị oke arụ ọrụ nke ọma mmezu nkuzi dị mma
    ajujunkọwa
  • DELTA DVP-ES3/2 Usoro Mgbasa Module

    DELTA DVP-ES3/2 Usoro Mgbasa Module

    PLC - Ndị njikwa mgbagha mmemme

    Programmable Logic Controller (PLC) bụ usoro njikwa na-eji ọrụ eletrọnịkị.Usoro nchekwa ya dị mfe, ụkpụrụ ịgbatị aka, ọrụ nke njikwa usoro / ọnọdụ, ngụ oge yana njikwa ntinye / mmepụta na-etinyere n'ọtụtụ ebe n'ọhịa njikwa akpaaka ụlọ ọrụ.

    Ndị na-ahụ maka mgbagha usoro mmemme nke Delta DVP na-enye ngwa dị elu, kwụsiri ike na nke a pụrụ ịdabere na ya nke ukwuu n'ụdị igwe akpaaka ụlọ ọrụ niile.Na mgbakwunye na ọrụ mgbagha ngwa ngwa, ntuziaka bara ụba na ọtụtụ kaadị ọrụ, DVP-PLC dị ọnụ ahịa na-akwado usoro nkwukọrịta dị iche iche, na-ejikọ draịva AC AC Delta, servo, igwe igwe mmadụ na onye na-ahụ maka okpomọkụ site na netwọkụ mmepụta ihe zuru oke. Delta Solution" maka ndị ọrụ niile.

    Ndị na-ahụ maka mgbagha nke mmemme – Usoro DVP

    Ndị na-ahụ maka mgbagha usoro mmemme nke Delta DVP na-enye ngwa dị elu, kwụsiri ike na nke a pụrụ ịdabere na ya nke ukwuu n'ụdị igwe akpaaka ụlọ ọrụ niile.Na mgbakwunye na ọrụ mgbagha ngwa ngwa, ntuziaka bara ụba na ọtụtụ kaadị ọrụ, DVP-PLC dị ọnụ ahịa na-akwado usoro nkwukọrịta dị iche iche, na-ejikọ draịva AC AC Delta, servo, igwe igwe mmadụ na onye na-ahụ maka okpomọkụ site na netwọkụ mmepụta ihe zuru oke. Delta Solution" maka ndị ọrụ niile.

     

    DVP-ES3/2 Usoro Mgbasa Module

     

    Okwu Mmalite ngwaahịa

    Atụmatụ & Uru

     

    Modul dijitalụ (mpụta / ntinye / mix), modul analog (mmepụta / ntinye / mix), modul nha okpomọkụ, modul edozi.

    Ngwa

     

    HVAC, igwe na-ebi akwụkwọ, igwe nkwakọ ngwaahịa, igwe injection ịkpụzi, usoro nyocha

    Nkọwapụta
    1. Modul dijitalụ (mpụta/ ntinye/ngwakọta): 8,16, 32(ike AC)
    2. Modul Analog (mpụta / ntinye / ngwakọta): ọwa 4, ntinye ọwa 6 (14-bit)
    3. Module nha ọnọdụ okpomọkụ: oge ​​ntụgharị 200ms / ọwa, n'ozuzu izi ezi +/- 0.6%, ntinye RTD mkpebi Pt100 / Pt1000 / Ni100 / Ni1000, ntinye thermocouple J, K, R, S, T, E, N ụdị
    4. Modul Resolver: anya 50M, mkpebi 12-bits, 500rpm, a na-akwado nchọpụta nkwụsị.
    ajujunkọwa
  • DELTA PLC – Ndị na-ahụ maka mgbagha usoro mmemme DVP-ES3

    DELTA PLC – Ndị na-ahụ maka mgbagha usoro mmemme DVP-ES3

    PLC - Ndị njikwa mgbagha mmemme

    Programmable Logic Controller (PLC) bụ usoro njikwa na-eji ọrụ eletrọnịkị.Usoro nchekwa ya dị mfe, ụkpụrụ ịgbatị aka, ọrụ nke njikwa usoro / ọnọdụ, ngụ oge yana njikwa ntinye / mmepụta na-etinyere n'ọtụtụ ebe n'ọhịa njikwa akpaaka ụlọ ọrụ.

    Ndị na-ahụ maka mgbagha usoro mmemme nke Delta DVP na-enye ngwa dị elu, kwụsiri ike na nke a pụrụ ịdabere na ya nke ukwuu n'ụdị igwe akpaaka ụlọ ọrụ niile.Na mgbakwunye na ọrụ mgbagha ngwa ngwa, ntuziaka bara ụba na ọtụtụ kaadị ọrụ, DVP-PLC dị ọnụ ahịa na-akwado usoro nkwukọrịta dị iche iche, na-ejikọ draịva AC AC Delta, servo, igwe igwe mmadụ na onye na-ahụ maka okpomọkụ site na netwọkụ mmepụta ihe zuru oke. Delta Solution" maka ndị ọrụ niile.

    Ndị na-ahụ maka mgbagha nke mmemme – Usoro DVP

    Ndị na-ahụ maka mgbagha usoro mmemme nke Delta DVP na-enye ngwa dị elu, kwụsiri ike na nke a pụrụ ịdabere na ya nke ukwuu n'ụdị igwe akpaaka ụlọ ọrụ niile.Na mgbakwunye na ọrụ mgbagha ngwa ngwa, ntuziaka bara ụba na ọtụtụ kaadị ọrụ, DVP-PLC dị ọnụ ahịa na-akwado usoro nkwukọrịta dị iche iche, na-ejikọ draịva AC AC Delta, servo, igwe igwe mmadụ na onye na-ahụ maka okpomọkụ site na netwọkụ mmepụta ihe zuru oke. Delta Solution" maka ndị ọrụ niile.

    Usoro DVP-ES3

    Usoro DVP-ES3 bụ slim PLC maka njikwa mmemme na ngwa dị elu.Ejiri CPU ya na ntinye ntinye ọsọ ọsọ 4 dị elu, ruo na njikwa 4-axis (pulse), yana nkwado maka mkpokọta 8-axis (CANopen) nsonaazụ ọnọdụ (nhọrọ).Ọ na-enye ọtụtụ protocol na ọrụ netwọk siri ike, ndị ọrụ nwere ike mezue ntinye na njikọ ngwa ngwa site na ngwanrọ nhazi enyi na enyi.

    Okwu Mmalite ngwaahịa

    Ngwa

     

    • Igwe eji eme ihe, igwe na-akpụzi injection, igwe nkwakọ ngwaahịa, igwe textile nke ziri ezi, nkwakọba ihe buru ibu, sistemu ngwa
    Nkọwapụta
    1. CPU:
      - 32-bit ngwa ngwa ngwa ngwa
      - Isi I/O arụnyere n'ime ya: 32/48/64/80
    2. Ikike mmemme: 64k nzọụkwụ
    3. Ndebanye aha izugbe: okwu 64k
    4. Ọdụ ụgbọ mmiri nkwukọrịta: RS-485 * 2, Ethernet * 1, na CAN meghere DS301 * 1
    5. Ihe nrụnye SD arụnyere (Micro SD)
    6. Oke.Isi I/O: isi 256 (ntinye 256 / ntinye 256)
    7. 4 igwe na-agba ọsọ dị elu: ugboro kachasị 200 kHz maka counter ọ bụla
    8. 4-axis (8 isi) mmepụta ọnọdụ dị elu na 200 kHz
    9. Na-akwado mkpokọta 8-axis (CANopen) nsonaazụ ọnọdụ
    10. Na-akwado IEC61131-3 mmemme (LD, ST, SFC na CFC)

     

    ajujunkọwa
  • Delta HMI Touch Panel HMI – igwe igwe mmadụ DOP-107BV

    Delta HMI Touch Panel HMI – igwe igwe mmadụ DOP-107BV

    Ogwe aka HMI - Ngwa igwe mmadụ

    Igwe igwe mmadụ (HMI) bụ ikpo okwu na-enye ohere mmekọrịta n'etiti ndị ọrụ na akụrụngwa akpaaka.Ngwaahịa HMI nke Delta na-enye ọdụ ụgbọ mmiri dị iche iche maka nkwukọrịta ngwa ngwa yana njikwa dị mma nke igwe, sistemụ na akụrụngwa dị iche iche.Ihuenyo mmetụ agba na-enyere aka ntinye oke nhụsianya yana ụzọ dị iche iche iji gosipụta data agbanwe agbanwe, gụnyere eserese na-ewu ewu na ihe mkpu.Ngosipụta LCD dị elu na-ahụ anya na-ahụ maka ọrụ, nlekota na njikwa nke ọma na ozugbo.Tụkwasị na nke ahụ, ngwanrọ na-edezi enyi na enyi na-eduzi ndị ọrụ ngwa ngwa ịmepụta akara ngosi dị mfe na-agagharị na ngwa ngwa na-emepụta ihuenyo nlekota nke ọma maka ngwa, mgbe ị na-eme mgbanwe, nhazi oge, na nhazi usoro nhazi nke na-eme ka mgbanwe dị mfe ma chekwaa oge mmepe.Nke a na-emepe usoro mmepe ngwa ngwa nke na-eme ka wiring na ntinye dị mfe, na-echekwa ụgwọ ọrụ, ma na-eme ka usoro dị irè karị, na-ewepụ mgbanwe na-ewe oge na ụgwọ mmezi ọzọ.

    Usoro DOP-100

    Delta's Human Machine Interface DOP-100 Series na-anabata ihe nrụpụta Cortex-A8 kachasị ọhụrụ yana 65,536 agba LCD ngosi panel nwere nnukwu nchapụta na ọdịiche.Usoro DOP-100 na-akwado ọtụtụ ọrụ netwọk, gụnyere FTP, E-Mail, VNC (Virtual Network Computing) Remote Monitoring, na NTP (Network Time Protocols) iji mezuo ihe ndị ahịa chọrọ maka ngwa igwe ojii na nrụpụta smart.

    Isi HMI

    The Basic HMI na-egosipụta ọrụ ndị bụ isi na ntinye dị mfe maka ngwa ụlọ ọrụ mmepụta ihe.Site na nchebe mmiri IP55, ọ dị mma maka gburugburu ebe dị njọ.

     

    Okwu Mmalite ngwaahịa

    Nkọwapụta
    1. 7” (800*480) 65,536 Agba TFT
    2. Cortex-A8 800MHz CPU
    3. 256 MB nke RAM
    4. 256 MB ROM
    5. 1 COM ọdụ ụgbọ mmiri / 1 ndọtị COM ọdụ ụgbọ mmiri
    6. USB Host
    7. Onye ahịa USB
    8. CE / UL kwadoro
    9. Okpomọkụ ọrụ: 0℃ ~ 50℃
    10. Nchekwa okpomọkụ: -20 ℃ ~ 60 ℃
    11. Oge ịpị:>1,000K ugboro
    ajujunkọwa
  • Delta HMI Touch Panel HMI – igwe igwe mmadụ DOP-103BQ

    Delta HMI Touch Panel HMI – igwe igwe mmadụ DOP-103BQ

    Ogwe aka HMI - Ngwa igwe mmadụ

    Igwe igwe mmadụ (HMI) bụ ikpo okwu na-enye ohere mmekọrịta n'etiti ndị ọrụ na akụrụngwa akpaaka.Ngwaahịa HMI nke Delta na-enye ọdụ ụgbọ mmiri dị iche iche maka nkwukọrịta ngwa ngwa yana njikwa dị mma nke igwe, sistemụ na akụrụngwa dị iche iche.Ihuenyo mmetụ agba na-enyere aka ntinye oke nhụsianya yana ụzọ dị iche iche iji gosipụta data agbanwe agbanwe, gụnyere eserese na-ewu ewu na ihe mkpu.Ngosipụta LCD dị elu na-ahụ anya na-ahụ maka ọrụ, nlekota na njikwa nke ọma na ozugbo.Tụkwasị na nke ahụ, ngwanrọ na-edezi enyi na enyi na-eduzi ndị ọrụ ngwa ngwa ịmepụta akara ngosi dị mfe na-agagharị na ngwa ngwa na-emepụta ihuenyo nlekota nke ọma maka ngwa, mgbe ị na-eme mgbanwe, nhazi oge, na nhazi usoro nhazi nke na-eme ka mgbanwe dị mfe ma chekwaa oge mmepe.Nke a na-emepe usoro mmepe ngwa ngwa nke na-eme ka wiring na ntinye dị mfe, na-echekwa ụgwọ ọrụ, ma na-eme ka usoro dị irè karị, na-ewepụ mgbanwe na-ewe oge na ụgwọ mmezi ọzọ.

    Usoro DOP-100

    Delta's Human Machine Interface DOP-100 Series na-anabata ihe nrụpụta Cortex-A8 kachasị ọhụrụ yana 65,536 agba LCD ngosi panel nwere nnukwu nchapụta na ọdịiche.Usoro DOP-100 na-akwado ọtụtụ ọrụ netwọk, gụnyere FTP, E-Mail, VNC (Virtual Network Computing) Remote Monitoring, na NTP (Network Time Protocols) iji mezuo ihe ndị ahịa chọrọ maka ngwa igwe ojii na nrụpụta smart.

    Isi HMI

    The Basic HMI na-egosipụta ọrụ ndị bụ isi na ntinye dị mfe maka ngwa ụlọ ọrụ mmepụta ihe.Site na nchebe mmiri IP55, ọ dị mma maka gburugburu ebe dị njọ.

    Okwu Mmalite ngwaahịa

    Nkọwapụta
    1. 4.3” (480*272) 65,536 Agba TFT
    2. Cortex-A8 800MHz CPU
    3. 256 MB nke RAM
    4. 256 MB ROM
    5. 1 COM ọdụ ụgbọ mmiri / 1 ndọtị COM ọdụ ụgbọ mmiri
    6. USB Host
    7. Onye ahịa USB
    8. CE / UL kwadoro
    9. Okpomọkụ ọrụ: 0℃ ~ 50℃
    10. Nchekwa okpomọkụ: -20 ℃ ~ 60 ℃
    11. Oge ịpị:>1,000K ugboro

     

    ajujunkọwa
  • Pump mmanụ mmanu

    Pump mmanụ mmanu

    Nke a lubrication mgbapụta bụ ụdị akpaka akara lubrication mgbapụta, adabara otu akara damping (SLR) usoro, mmanụ injection okirikiri bụ 10-999 nkeji, injection eruba bụ 1-99 ml, mgbali bụ 1.2 Mpa, na uru nke obere mkpọtụ. , elu arụmọrụ, mfe ọrụ, wdg ọ na- wildly na-eji iho mmanu gia, ndu ụgbọ okporo ígwè na yinye na igwe ngwaọrụ, textile machinery, elevator, woodworking machinery etc. iji nweta mmetụta nke na-enweghị ntuziaka ọrụ, oge quantitative akpaaka .. .
    ajujunkọwa
  • Ụkwụ aka

    Ụkwụ aka

    2-6 Axis 100/25 PPR 5v/12v/24v MPG Handwheel

    Ngwa:

    Enwere ike itinye ya na usoro CNC dị iche iche, dị ka FANUC, SELCA, HANUC, SIEMENS, MITSUBISHI, FAGOR, HEIDENHAIN, LNC, SYNTEC, SKY, HUM, GSK, KND, HNC, NEWKYE, WASHING, na ndị ọzọ a ma ama. Sistemụ CNC.

    Ndị ahịa nwere ike họrọ ihe nlereanya dị ka mmepụta voltaji (DC5 ~ DC15V) na mmepụta usu (25 PPR ma ọ bụ 100 PPR), ọ nwere ike na-achịkwa na kasị 11 axis.anyị nwere ike ime ka handwhell na mmepụta voltaji DC24V dị ka ndị ahịa chọrọ.

    ajujunkọwa
  • Ihe ngbanwe Spindle

    Ihe ngbanwe Spindle

    Spindle Encoder 5v 1024ppr/600ppr maka igwe cnc

    ajujunkọwa